Cleaning head Motodecap YMC 615

The MOTODECAP YMC 615 washing head has a maximum operating flow rate of 250 l/min and a pressure of 600 bar. This washing head can be adapted to different types of industrial applications thanks to its versatility and adjustment options.

Information request

See the following document for performance options :

Additional information



, ,


Operating pressure 0 – 600 bar
Usage flow ≤ 250 l/min
Head rotation speeds (Nt) 30 (1) min-1
Nozzle rotation speed (Nb) 4 (1) min-1
Diameter of the swept sphere See table bellow
Maximul fluid temperature 90 °C
Number of nozzles 2


Minimum passage diameter 170 (2) mm
Weight 21 Kg
Dimensions 170 x 150 x H 650


Optimal scanning diameter (m) (4) Head inlet pressure (bar)
150 300 450 600 Flow



4,0 2,4 3,7 4,2 4,9
5,0 3,7 5,3 7,0 7,4
6,0 5,4 7,6 9,4 10,8
7,0 7,4 10,4 12,8 15

(1) The speed of rotation depends on the available air pressure. The speed can be adjusted by means of a pressure regulator (available on request).

(2) The passage diameter can be reduced by ensuring that the jet holders are in the vertical position when inserted into the tank opening.

(3) Another possibility to connect to the power supply as standard: G1. (For other types, please consult us).

(4) Other possible materials on request (depending on the environment, the nature of the fluid and its characteristics if other than water).

(5) The temperature class depends on the temperature of the fluid in question.

(6) The provided sweeping diameters are valid for conventional rinsing operations. In cases where a finer cleaning is required, these diameters should be adapted.

Cleaning head Motodecap YMC 615